Sea to Sky SPC - 202 was Awarded the Master Painters (NZ) Best New Paint Product in 2004.
SPC - 202 is an acidic product environmentally based from water, alcohol and surfactant blend. It is designed to remove latexes, oil based coatings and epoxies. SPC - 202 is supplied in gel form for brushing and spraying. It reduces health and safety risks as it is non-flammable, non-toxic and replaces other chlorinated and caustic products. SPC - 202 is white in colour.
Recommended Use:
SPC - 202 Coating Remover can be applied on coatings adhered to all types of metal, concrete, masonry, brick and timber.
Most anti-fouling paint is coloured, SPC - 202 being white aids in removal and collection of stripped paint waste which eliminates any physical contact with the biosides or anti-fouling agents contained in the coating being removed. Always apply small test patches on timber or masonry substrates to check no colouration changes occur.
Coverage:
When brushing or spraying a coverage of less the 1 litre per square metre of surface possible. Where there are multiple layers or paints of high percentage solids additional product may be required. Repeat application may be required but it is important that the first application has been absorbed.
Preparation:
All areas not being stripped that are in close proximity to the application surface should be masked and protected with polythene. It is important that a strong ground sheet be used to contain paint, product and rinse water. Waste must be tested and treated if necessary before disposal. All surfaces including rubber and plastic should be taped or enclosed by polythene.
Site Conditions:
It is recommended that temperatures are above 5° to 10°c . The product works better at warmer temperatures. Good ventialtion should be provided.
|
on Surface Preparations Compound.
